Transparent Roof Panel
Plastic roofing (PVC ROOF & ASA ROOF) provide a clean, quick and economical installation with high resistance to fractures, weather.
transparent roof panel
>> Industrial plants, warehouses,
>> Stations, docks, airports, car parks
>> Greenhouse, aquaculture
>> Sports venues, courtyard lighting
Specifications of transparent roof panel
Round wave, Big Round wave, trapezoidal wave
ASA engineering plastic from SABIC, Raw PVC material, and other chemical materials
Max 5.8m for 20FT container, Max11.8m for 40HQ container
Excellent advantages of transparent roof panel
Application and Installation of transparent roof panel
1. Roofing light sheet and sunshade for office building, etc
2. skylight, lighting for corridors, balcony, passages and subway entries, walkways.
3. Advertising lamp boxes, sign board
4. Bank ATMS. Bullet resistable material
5. Conservatories, agricultural greenhouse, zoos, botanical gardens.
6. industrial roofing and glazing.
7. Swimming pools roofing/cover/sheet.
8. Telephone booths, street name plates.
9. Airplanes trains, ships, vehicles.
1. Lighting tile to be fixed before the pilot hole, the diameter must be greater than 50% of the fixed screw diameter, in order to avoid the thermal expansion and contraction of internal stress generated by cracking light tile.
2. Lighting tiles with aluminum fasteners fixed, waveform lighting tiles with lighting and self-tapping screw bracket bracket fixed, re-seal plastic. The location of lighting tiles generally set in the cross.
3. Lighting tile and steel plate in the vertical overlap, the minimum must be 200mm overlap, and paste the two water stop.
4. Lighting tiles and self-tapping screw connection, there must be cover. Sunlight plate hot and cold deformation is large, easy to be self-tapping nail scissors, so the sun plate in the play tapping nail should open a larger hole. In the installation of lighting panels to consider the flexibility of the lighting board.
5. Lighting tile fixed, you must use a good pan of water washer, so that between the screws and lighting board in order to facilitate waterproof and dust proof. Will be set after the pan of water into the screw, the lock with electric drill purlins, the completion of the lighting plate of the fixed work.
6. Light tiles within 12m without lap, more than 12m need to overlap, lap length of 200-400mm, lap two sealant applied, no need to take the lateral adhesive, vertical color plate overlap Need to see the plate type, the general pressure plate, generally do not consider to do income side, directly with the color plate with a self-tapping screw fixed, and the application of sealed plastic, bite board to be done to close.