Polycarbonate Greenhouse Panel
Our polycarbonate greenhouse panel has a cellular polycarbonate structure that yields a lightweight sheet with high impact strength and superior thermal insulation. High light transmission makes olycarbonate greenhouse panel ideal for varied roofing, wall cladding, and glazing applications.
Polycarbonate greenhouse panel
Polycarbonate greenhouse panel is used imported PC resin as raw material and has excellent physical, mechanical, electrical and thermal properties. It is popular material in the building industry. The light transmittance of the sunshine sheet is 35 ~ 80%, and the UV co-extrusion layer can effectively resist the ultraviolet light. The hollow structure could increase the insulation, noise effects with lighter weight.
Specifications of Polycarbonate greenhouse panel
PC Hollow sheet
Four layers/Honeycomb sheet
Main color of Polycarbonate greenhouse panel
We could produce according your color.
Excellent advantages of Polycarbonate greenhouse panel
Light and high environment
High impact strength
Simply processed and installed
Good weather resistance
Good flame resistance
Excellent heat insulation capability
Application of Polycarbonate greenhouse panel
Industrial plants, warehouse lighting roof, residential, shopping malls lighting, stadium lighting roof.
Modern city railway station, bus station and airport waiting hall ceiling, access, parking roof.
Agricultural greenhouses and breeding sheds.
Interior screen, balcony partition, interior decoration, packaging materials, display rack panels.
Installation and notes of Polycarbonate greenhouse panel
When hollow profile and solid sheet are installed with screw installation, all rivet holes should be reamed to reserve space for expansion and contraction, Usually, the holes should be larger than the diameter of the bolt or rivet stems by 50%, so as to avoid expansion or shrinkage.
Fill up the holes, and cover the exposed portion with silicone compound to prevent detergents permeating which brings damage to PC sheets and avoid gradual cracks.
Rivet heads should be larger than the stems by 2 times. Use gaskets or washers to avoid the rivet heads touching PC sheets, and reduce the pressure.
Do not screw into too tightly.
Do not use gaskets made of PVC.
The bending part should be avoided using screw for cold bending process.
During handling, the products must not be thrown rudely to avoid damaging or scratching the product surface.
Store the tiles in dry and flat site with good ventilation. Products should be protected by coverings with good air permeability.
Roof sheet is applicable for the pitch from 20°to 80°. For the pitch beyond this range, special measures should be taken during installation.
1. Anti-corrosion treatment: Metal purlines should be coated with one layer of anti-rust paint and two layers of finishing coatings. Wood purlines should be coated with anti-corrosion or asphalt oil.
2. The top purlines should have 180mm distance from the ridge line in order to install the ridge tiles.
3. The bottom purline should have 50-70mm distance from the eave.
4. The suggested purline spacing is 660mm.
Test Report of Polycarbonate greenhouse panel
HDT(Heat Deflection Temp)
COLTE(coefficient of linear thermal expansion)
Impact Falling Weight
FAQ of Polycarbonate greenhouse panel
Q: What machine do you use to cut the roof and install the screws ?
A: Using portable cutting machine and Portable electric drill.
Q: Does you charge for the samples?
A: We just sent free samples to customers while the customers afford the freight fees.
Q: Can you produce according to customers' design?
A: At the beginning you need pay the mould fees,after certain quantity, the mould fees will be returned as product.