Tel: +86-531-86975099

E-mail: director@pingyungroup.com

Hard PE Fender For Marine Construction

Hard PE Fender For Marine Construction

Description These fenders are usually equipped with a chain net and tires, or with a wire mesh, end rings, traction rings and swivel joints with suitable D-rings at both ends for extended service life. Sling fenders are also available upon request. These fenders offer excellent shear resistance,...

Send InquiryChat Now
Product Details

Description

These fenders are usually equipped with a chain net and tires, or with a wire mesh, end rings, traction rings and swivel joints with suitable D-rings at both ends for extended service life. Sling fenders are also available upon request. These fenders offer excellent shear resistance, tilt compression and high reliability.


Advantage

1. The wear resistance always in the heat resistant polymer.

2. It has the best impact resistance even at low temperatures.

3. The friction coefficient is low and the sliding bearing material is good.

4. Lubricity (no agglomeration, adhesion).

5. The best chemical resistance and stress crack resistance.

6. Excellent machining ability.

7. Minimum water absorption (<0.01%).

8.Paragon electrical insulation and antistatic properties.

9. Good high energy radioactivity.

10. Density is lower than other thermoplastics (<1g / m3).

11. Operating temperature range: -269 ° C - 90 ° C.


Parameter


Property

Virgin Material

Unit

Molecular weight

3-9 million

g/mol

Density

0.92—0.98

g/cm3

Compression Strength

≥32

Mpa

Tensile Strength

≥22

Mpa

Elongation at break

≥280

%

Dynamic Friction coefficient

≤0.18


Notched impact strength(Charpy)

≥100

KJ/m2

Vicat softing point

≥80

Hardness Shore—D

61-66

D



Hot Tags: hard pe fender for marine construction, manufacturers, suppliers, factory, price
Related Products
Inquiry